Helipuller™ 6mm & 9 mm

This is the Helipuller™ which is the most generic to anything. It’ll pull optimally on 6 mm CatX, as that’s what it as designed for. However, it’ll also pull pretty much any cable you throw at it (for as long as the diameter is under 6mm). The Helipuller™ 6 mm is terminated on an M5x0.8 mm threaded hole which allows inserting PulR™ pulling sticks in cascade, but also one of many different attachments, including adapters for 8-32 mm LSDI threaded pulling rods, magnetized heads, rope eye, fish tape adapters, etc. The Helipuller™ 6 mm is also available with 8-32mm and 1/4 UNC threaded ends for other pulling stick vendors. The Helipuller™ for bare cables is also available with a 8.9 mm HelicalGrip™ for larger diameter cables such as Cat6A and 24AWG twisted pair cables. It is included as part of the Any Twisted Pair Kit on our Readytopull.com online store.

Helipuller_6mm-1

Helipuller_9mm

For more information, please fill the form below: